Uploading Guide

You can upload files from uploading area. You can reach uploading area by clicking uploading icon on the right upper side of main page. Choose the job you want to upload and upload the files necessary files seperately (Cover, inner pages and all the extra options should be uploaded one by one)

Format  Multiple page PDF file JPG and TIFF formats are acceptable only files prepared in Photoshop

PDFFiles must be free of Alpha Channels and all the clipping paths must be removed. All the images must be flattened. Press quality should be choose. PDF files has to be in CMYK in color printining jobs; greyscale in black and white printing jobs.

JPG format must be standart JPG in maximum quality and baseline

Resolution  300 dpi.

All the fonts and lines should be pure black.

Bleed should be 4 mm in three sides except spine side.

Safety space is the space on the 4 edges of pages. You should'nt position in images, icons or signs in this area. There is a risk to be cutten out. Safety space in the pages is 8 mm. Safety space is the spine is 1 mm from the sides and 8 mm from the top and the bottom side.

Any kind of embossings fonts should be not less than 15pt. And the lines width shouldn't be less than 1,2 mm.

Spot UV Varnishing fonts should be not less than 13 pt. And the lines width shouldn't be less than 1 mm.

Spine width calculation should be made as follows: (Number of pages * 0,05 mm). Re adjustment of spine width will be made according to paper type in our plant.

Cover With Flaps You can add flaps from one side or both sides as you wish. Flaps width should be at least 2 cm shorter than the finished formats width from the each side and each flap shouldn't bee shorter than 6 cm. Height of the flaps should be same as jobs finishized size. (Please consider spine width)

Book Bands Book bands should contain 2 wings after the cover. Wings should be not less than 6 cm and should be at least 2 cm shorter than finished size. Height of the book bands should be maximum half of the finished size. (Please consider spine width)

Jackets Jackets should contain 2 wings after the cover. Wings should be not less than 6 cm and should be at least 2 cm shorter than width of finished size. Height of the jackets should be same as jobs finished size. (Please consider spine width)